Previous slide
Next slide
Product Description
Cement canvas is a new product with revolutionary materials called Geosynthetic Cementitious Composite Mats used as an alternative to conventional concrete.
It is a flexible, concrete filled geotextile that hardens on hydration to form a thin, durable, waterproof and low-carbon concrete layer.Essentially, it’s concrete on a roll.
Application
Environmental Protection and Landscaping:
Utilized in artificial lakes, roof gardens, and landscaping projects, these materials provide an essential barrier against water penetration, preserving the integrity of these spaces.
Infrastructure and Civil Construction:
In the construction of dams, reservoirs, tunnels, and subways, these products offer crucial waterproofing capabilities. They ensure the stability and longevity of such structures by preventing water ingress.
Waste Management and Containment:
For landfills and waste storage facilities, the Anti-seepage Series offers robust solutions to prevent leachate migration and groundwater contamination, crucial for environmental safety.
Industrial Safety:
In industrial applications like oil depots and chemical storage yards, these materials are key to preventing spills and leaks, ensuring a safe and secure operational environment.
construction case
Installation
preparation work
First, we must plan and measure to ensure a certain slope so that the water flow can flow smoothly from the upper end to the lower end. Secondly, after the construction site is cleaned and leveled, the construction line is set according to the design drawing, and the drainage slope is re-measured.
Excavation
Set the construction line according to the design requirements, the sides of the ditch need to be leveled, and the slope inside the ditch must not have any virtual soil and empty holes. It is necessary to treat the water damage parts in a tamping manner, except for debris and gravel in the slope. If necessary, use ash soil for compaction treatment, or grouting and reinforced to seal, and the treated parts are required to have good stability.
laying
The material can be laid vertically and horizontally. Be sure to level the substrate, otherwise it will affect the appearance quality!
seam processing
4.1. The lateral width of the adjacent two cement blankets is 10cm wide and the depth is doubled. Place the cement blanket joint at the stack and flatten it. 4.2. Press the cement blanket above the cement blanket in the direction of the water flow, and the superimposed area shall not be less than 4.3 Evenly apply sealant at the seam. 4.4 Fix two pieces of cement blanket with 5*38mm stainless steel screws 4.5 groove along the treatment Fix the edge of the material on the edge of the groove with rivets, and fix it with rivets, fix it and use it. The soil covers the edge 4.6 watering solidification Before the watering, it is necessary to inspect and check the whole of the laying. After passing the water, it can be watered! It needs to be watered 9kg (thickness is calculated in 10m) to be poured, and it must be poured less, evenly from the edge to the middle. Sprinkle water, preferably by spraying, the flow rate is 4000ml/min until the color of the cement blanket becomes darker. Do not use a water column with a high pressure!
FAQ
- Home
- FAQ
Contact Us
Contact us to get a free quote and more expertise about custom geosynthetics . Your project will meet a right solution with WonderGeo.
- +86 18661683263
- wondergeo@gmail.com
- Taian, Shandong,China
